The Omnisense S500 System includes the capability of accurate time transfer between nodes in the network. This can be achieved to very high accuracy and, in the S534, node a physical clock pulse can be generated.
Each S500 node operates from its own asynchronous clock. Nodes measure the time of arrival of signals from neighbours using their own local clocks as a reference.
When a node broadcasts its navigation signal (chirp), the data message contains information about itself including its estimated position, the time of the transmission based on its own clock and a subset of its neighbour observations.
Within the Omnisense JTLE (Joint Timing and Location Engine) sophisticated algorithms are used to track clock offsets between nodes and to compute the positions of the nodes.
In this way a highly accurate absolute time synchronised soft clock is established in each node.
Each node, therefore, has a free running unsynchronised local clock based on its internal low cost crystal oscillator, and a very accurate synchronised soft clock.
The soft clock may be used to generate a physical clock pulse (typically a pulse-per-second output similar to GPS). A low resolution pulse is available on the present S534 product. A very high precision pulse may be available in the future if applications demand.
● Internal Soft Clock accurate to 5 ns
● Low resolution pulse on S534 to 100 μs
● Future high resolution pulse to 10 ns
The S500 system can be slaved to GPS time using a 1PPS time pulse from a GPS time transfer receiver.
Copyright © 2020 Omnisense Ltd
Unit 1B, Alington Road, St Neots, Cambridgeshire, PE19 6WL
tel: +44 1223 651390, email: email@example.com